Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a narrow troubleshooting fix, not a general review: the owner's Kubota L48 got stuck with the gear shift lever jammed in high and wouldn't start or return to neutral. He walks through the actual fix, pulling the stop solenoid partially loose and backing out the neutral sense switch so the tractor reads neutral, allowing it to start and freeing the shifter. Useful specifically for L48 owners hitting this exact stuck-lever/no-start problem.
Posted by the Mark H channel, an owner sharing a hands-on fix discovered while working on his own tractor.
The tractor needs to sense neutral to start. When the lever is stuck in high, the neutral sense switch doesn't register neutral, so it won't start.
Pull the stop solenoid loose just past the end of the threads, then back out the neutral sense switch so the tractor reads neutral, start it, and the shifter frees up.
It sits near a detent hole where a small armature or protrusion normally goes in to tell the tractor it is in neutral.
