Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A concise step-by-step installation walkthrough for ITC's brush screen insert, covering bolt removal, positioning the screen, marking and drilling holes (with tips on speed, oil, and pressure), deburring, and final hardware assembly using the included Allen key and 7/16 wrench. It's a short reference clip rather than a buying guide or comparison. Most useful to someone who already owns an ITC brush screen and needs a visual assembly reference.
Posted by the ITC Quick Attach channel, making this a manufacturer-produced how-to for their own product.
Remove the pivot bolt nuts and washers, slide the bolts out partway, place the screen insert, mark and drill the upper bolt holes, deburr them, then install hardware with the included Allen key and 7/16 wrench.
A Sharpie, center punch, the provided drill bit with oil, a step bit for deburring, compressed air, a rag, and the included Allen key and 7/16 wrench.
No, the process is essentially the same on all of the brush screens on their website.
