Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A step-by-step technician walkthrough of a full Workmaster 25S service, covering hood removal, engine oil drain and filter swap, two fuel filter changes (spin-on and inline), and hydraulic filter replacement with tire removal. It lists exact tools and specifies New Holland 15W-40 at three quarts. The narration is procedural rather than explanatory, so it suits owners who already know the basics and just need the sequence confirmed.
Posted by the westhillstractor channel, which presents a named technician performing the service, suggesting a dealership or shop setting with a likely promotional lean.
Press the button on the left side of the steering wheel, loosen four bolts on top with a 12mm socket, two bolts underneath with a 13mm socket, remove a side screw, then work the hood off gradually on each side.
The video uses New Holland 15W-40 engine oil, pouring three quarts back into the tractor through the fill cap after draining.
Jack the tractor up at the rear axle below the PTO cover, remove the lug nuts and tire on the left side, then use a hydraulic filter wrench to replace it.
Two: a spin-on filter on the right side removed by hand, and an inline filter by the air box requiring hose detachment and a quarter inch socket.
