Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Focuses specifically on the DIY hydraulic plumbing needed to connect a Meyer 6-foot plow to a Kioti CK-3510SE using a third-function kit, including sourcing adapters (half-inch to three-eighths to quarter-inch fittings) from Tractor Supply and a hardware store, plus a skid steer quick-attach adapter for the three-point hitch. A practical problem-solving walkthrough for owners facing the same non-standard hookup challenge, not a general tractor overview.
Posted by the Mead's Outdoor Adventures channel, whose enthusiastic tone and first-person commentary suggest a relatively new owner sharing real-time DIY experience rather than a dealership or professional.
You need a half-inch to three-eighths adapter, a five foot three-eighths hose, and a three-eighths to quarter-inch adapter to reach the plow cylinders.
Most parts come from Tractor Supply, except the three-eighths to quarter-inch adapter, which required a trip to a hardware store.
A Cat Zero to Cat One pin adapter is used since the stock holes only fit Cat Zero pins, and a skid steer quick attach plate connects to the three-point hitch.
