Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model โPit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison โWritten guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles โThis is a real-time, hands-on DIY maintenance session on an owner's own 3032E, covering oil and oil filter change, air filter swap, and both the fuel filter and secondary fuel filter replacement, including draining, cleaning gunk from the filter housing, and refilling fluids with a dipstick check. It's unpolished and narrated informally, but it does show every step and tool used, including a filter wrench purchased specifically for the job. Best for owners planning to do this exact service themselves.
Posted by the Frank Echevarria channel, an owner performing maintenance on his own tractor rather than a dealer or professional mechanic.
Drain the old oil, use oil filter pliers to twist off the old filter, fill the new filter with oil before installing, then tighten about a quarter turn with a wrench.
The transcript states the filter holds three quarts and the engine takes four quarts total, adding the extra quart slowly and checking the dipstick.
Turn the fuel switch to off, use a wrench to remove the old filter, clean out gunk from the housing, install the new filter, then turn the fuel switch back on.
Yes, the video shows buying performance tool oil filter pliers from O'Reilly's because the filter is hard to remove by hand, and the same tool is used on three filters.
