Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a dealer walkaround of a pre-delivery 3032E with the 300E loader, delivered by an Everglades Equipment Group staffer still fresh off the truck. It covers loader lift specs (84 inches, ~1,200 lb at full height), model number decoding, engine bay layout (Yanmar engine, DPF/regen explanation), cab controls, and a detailed rundown of service intervals for filters and fluids. Good for buyers wanting a specs-and-maintenance-focused intro before purchase.
Posted by the Everglades Equipment Group dealership channel, so expect a sales-oriented but detail-heavy walkaround from staff, not an independent owner review.
The 300E loader has 84 inches of lift height and just under 1,200 pounds of lift capacity at full height, measured at 500mm in front of the pivot.
It is a 3 Series tractor with 32 horsepower and an E trim level, following John Deere's pattern of family, horsepower, then trim letter (E, M, or R).
Hydraulic oil filter, fuel filter, water separator, and engine oil filter should be changed every 400 hours or annually, while the air filter is changed every 600 hours or when dirty.
It uses a Yanmar engine, which is a Final Tier Four emissions engine equipped with a DPF and regen system to burn off carbon buildup.
