Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a narrow, quick repair clip: replacing a broken cab window latch on a John Deere 5075E, filmed after the job was already done rather than as a live walkthrough. It covers removing the cap and nut, popping the C-clip, freeing the pin assembly, and installing the new latch. There's no discussion of parts sourcing or cost. Useful only for owners with this exact broken-latch problem looking for a fast fix reference.
Posted by the Let's Figure This Out channel, which appears to be an owner sharing a DIY fix on their own tractor.
Pull off the cap, loosen the nut, pop out the C-clip, push the pin up to remove the assembly, then install the new latch, drop the pin in, thread the shaft through, and tighten the nut.
Yes, there is a C-clip under the cap that needs to be popped out before you can push the pin up and remove the latch assembly.
