Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A short owner-made tutorial focused on one specific fix: lowering the minimum drop point of a John Deere 3033R's three-point hitch without any tools, by adjusting the left support bar after removing the quick hitch. Frank explains why he needed the change (implements sitting too high to couple without pallets), walks through the adjustment, and adds a tip on switching to float position. Most useful to compact-tractor owners hitting the same limitation.
Posted by the MI Off-Grid Adventures channel, where Frank shares hands-on owner experiences from off-grid life in Michigan.
Remove the quick hitch, then loosen the threading on the bottom of the left support bar and back it down to the height you want, about a little over an inch in this case.
No tools are required. The only real step is removing the quick hitch to access the left support bar, then adjusting it by hand.
Frank couldn't pick up implements like his ballast box and rake because the hitch wouldn't go low enough, forcing him to store them on pallets or blocks.
While the quick hitch is off and the support bar is being adjusted, you can set it to float instead of fixed, which lets it bounce over rocks or obstacles.
