Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a short, narrow how-to: an owner installing a WR Long third function kit on his Massey Ferguson 2606H with a 911X loader, aimed at adding grapple capability. At under four minutes, it focuses specifically on locating and rerouting the power beyond connection on the control valve, clarifying confusion left by both WR Long's printed instructions and Massey dealer advice. Best for owners mid-install needing that one specific wiring/plumbing clarification, not a general review.
Posted by the David Raines channel, an owner documenting his own DIY third-function installation.
The power beyond valve is the bottom connection on the outboard side of the tractor, in the block labeled P, where the yellow hose connects.
The valve bolts into two holes, then you remove the original hose from the bottom connection and connect the short hose from the kit to where the power beyond hose was.
The video states it would probably be the same with any of the 2600 series with the 911X front end loader.
