Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A step-by-step installation walkthrough for the Piranha (V-Expand) tooth bar on a Kioti CK2610 bucket, covering fit-and-finish details, hammer-on seating, Sharpie marking, drilling from 1/16" up to 3/4", and final bolt/lock-nut assembly. The presenter paid $300 shipped and shares a few practical tips beyond the included instructions. Best for anyone who just bought one and wants to see the full process before starting.
Posted by the Traditional Living channel; presenter appears to be an owner-operator doing the install himself on his own tractor.
Hammer it onto the bucket lip snug with a rawhide mallet, clamp it in place, mark bolt hole locations with a Sharpie, drill from 1/16 inch up to 3/4 inch, then bolt it on with washers and lock nuts.
It's supposed to have about an eighth of an inch to a quarter of an inch of play since it's an interference fit sized to the bucket's inside measurements.
The guide marker with the cross should sit about an eighth of an inch from the back edge and be centered vertically up and down.
The clearance allows for wear and keeps it from binding up, and lets the teeth slide back as the original cutting edge wears down while still bolting on correctly.
