Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a real hands-on fuel filter replacement on a Mahindra 4035, filmed by an owner doing it for the first time himself. It covers locating the filter, draining it, pulling it with an oil filter wrench, swapping in a cheaper Bosch equivalent, and bleeding the system via the priming pump and bleed screw. It also flags a real safety issue: hydraulic lines rubbing through onto a live starter solenoid terminal. Good for owners doing this job themselves.
Posted by the Rockysaws channel, an owner sharing a first-time DIY repair on his own tractor rather than a professional or dealer tutorial.
Drain the filter via the bottom hose, remove it with an oil filter wrench, install a Bosch equivalent filter, oil the gaskets, then bleed air out using the hand primer and bleed screw until fuel flows.
A Bosch filter, part number 1457434314, is identical to the original Mahindra filter but costs less than half as much when bought through Bosch.
Factory hydraulic power steering lines can rub against the positive starter solenoid terminal, wearing through the hose and nearly causing a fire; some tractors reportedly burned because of this.
No, but removing the loader makes accessing the fuel filter much easier since space around it is very tight.
