Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a straightforward maintenance walkthrough, not a review or buying guide: it goes point-by-point through checking front axle gear oil, engine oil and coolant, hydraulic fluid, and the single grease point on the hydro pedal return spring, naming fluid types and specs (80/90 gear oil, 15/40 CF-rated engine oil, ethylene glycol, NLGI 1-2 grease). Useful for current BX2360 owners doing routine fluid checks, not shoppers evaluating the tractor.
Posted by the Tractor Tech channel, presented as a practical how-to rather than a sales pitch.
It takes 80 or 90 weight gear oil, or you can also use Kubota UDT or Super UDT hydraulic oil.
The hydro pedal return spring is the only grease point on the tractor and only needs a shot or two of NLGI 1-2 grease every 50 hours.
For temperatures above 32 degrees, use a 15/40 oil that meets the CF spec or better.
It is a yellow dipstick at the back of the tractor; fluid level should reach the top of the crosshatch mark.
