Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a full hands-on oil change on a BX2360, paired with an explanation of why it matters: diesel oil ratings (CK-4/CJ-4), 15W-40 recommendation, thermal breakdown, and moisture contamination from short run cycles. It walks through draining warm oil, swapping the filter with correct gasket seating, torque cautions against overtightening, refill quantity (about 3 quarts), and checking the dipstick level. Good for owners wanting both the how and the why.
Posted by the Practical Diy For the Capable Homeowner channel, an owner sharing hands-on DIY maintenance from personal experience with their own tractor.
A diesel rated oil with a CK-4 or CJ-4 rating on the bottle. The video runs 15W-40 year round, which the manual recommends.
About 3 to 3.3 quarts. In the video, 3 quarts brought the level to just shy of the top mark on the dipstick.
Finger tight only, about half to three-quarter turn past contact for the filter, and just snug for the drain plug, since over-tightening can strip threads.
Thermal cycling weakens viscosity and depletes additives, and short run cycles in cooler weather cause condensation that mixes with oil, creating acidic, corrosive conditions.
