Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on, step-by-step walkthrough of pulling the mower deck off a Kubota BX2360 and reinstalling it, made in response to viewer requests after an earlier belt-replacement video. It covers releasing the deck lift pins, disconnecting the PTO shaft and sleeve, freeing the front attachment points, sliding the deck out from under the tractor, and the full reverse process for reinstalling and reconnecting everything. Good for owners doing their own blade sharpening or deck maintenance.
Appears to be an owner-operator demonstrating maintenance on their own BX2360, filmed informally without dealer or commercial framing.
Lower the deck fully, pull back the lift pins on both sides and lock them in the notch, disconnect the PTO shaft sleeve, release the front attachment points, then pull the deck straight out from under the tractor.
Reach under the tractor, grab the sleeve on the PTO shaft, pull it back and hold it while pulling the shaft straight off the PTO.
Push the deck shaft on until it clicks onto the PTO, line up the lift arm pins through the slots, lower the deck, then reattach the front hooks and pin.
The video was made to show deck removal for blade sharpening, after viewers asked following an earlier belt replacement video.
